Good Description: GN181 power tiller very suitable for use in paddy fields, dry fields, orchards, vegetable gardens and hilly land with a little inclination. It can be used for plough, rotary tilling, harrowing in paddy fields, harvesting, drilling, ditching, transportation and etc. If suitable farm implements or accessories are attached. In addition, it can also be extensively used as a stationary power source for small scale drainage and irrigation, sprinkling, grain threshing, cotton ginning, flour milling, fodder cutting and so on.
Parameters:
Model of Power Tiller
Unit
GN-181
Structure weight
Without rotavator
kg
380
With rotavator
550
Working weight (with rotavator)
kg
605
Turning speed of rototilling shaft
rpm
324/406
Overall dimensions (L*W*H)
mm
2950 x 980 x 1240
Number of blades
PCS
24
Rototilling width
mm
680
Type of tractor
Single axle, dual-purpose for both traction & drive
Travelling speed
Forward
Km/h
2.18, 3.87, 6.5, 8.06, 14.31, 24.03
Reverse
1.72, 6.36
Type size
6.00-12
Wheel track
mm
810, 750, 690, 570(normally use 810)
Min. ground clearance
mm
210
Min. turning radius
m
1.1(with no rotavator)
Model of engine
ZS1110N
Type of engine
Horizontal 4-stroke
Bore x stroke
mm
105*115
Total displacement
L
0.9959
Compression ratio
17:1
Turing speed of crankshaft
rpm
2200
1-hour rated output
KW/hphp
13.34/18.15
12-hour rated output
KW/hp
12.13/16.5
Specific fuel consumption
g/kw.h
≤246.2
Specific lube oil consumption
g/kw.h
≤2.00
Cooling mode
Condenser (Radiator)
Main farm implements (optional)
Anti-skid steel wheel Model 100-640 Double-furrow plough Model 1LS-220 Disk plough Model 1LS-220Y Power driven disk plough Model 1LYQ-320 Sprinkler Model 8Y-80 Swather/reaper Model 4GL-130 Trailer 7C-1 (Standard) Trailer 7C-1.5BH (Hydraulic dumping)